Winyao USB1000F-C Network Atapter
Winyao USB1000F-C network card adapter is based on the Realtek RTL8153 Ethernet controller and features a USB3.0 Type-C design with onboard one SFP Cage. All ports support 1000Mbps speeds and deliver full line-rate Gigabit Fiber network connectivity.
The adapter is for Designed for desktops, laptops, Ultrabooks, tablets, docking stations, industrial embedded devices, and PLC/IPC systems that need a reliable wired network through USB, the adapter uses the Realtek RTL8153 USB 3.0 to 1000M Gigabit Ethernet controller. It adds a SFP Gigabit LAN port to devices connector and suits office PCs, industrial computers, USB-to-Ethernet dongles, LAN expansion, and embedded "data over USB" platforms.
Key Features
- Realtek RTL8153 USB 3.0 to Gigabit Ethernet controller
- USB Type-C connector
- Supports USB 3.0, USB 2.0, and USB 1.1
- CDC-ECM mode for driver-light OS support
- Supports USB LPM L1/L2 and SuperSpeed U1/U2/U3 low-power states
- Supports Auto MDI/MDI-X crossover detection and auto-correction
- Supports pair swap, polarity correction, and skew correction
- Supports Wake-on-LAN (WoL) and RealWoW! remote wake-up technology
- Supports ECMA-393 ProxZzzy standard for sleeping hosts
- Supports LAN disable through GPIO
- Supports Jumbo Frames up to 9 KB
- Supports IEEE 802.3x full-duplex flow control
Performance Features
- Compliant with IEEE 802.3 / 802.3u / 802.3ab
- Supports IEEE 802.1P Layer 2 priority
- Supports IEEE 802.1Q VLAN tagging
- Supports IEEE 802.3az Energy Efficient Ethernet (EEE)
- Supports NDIS5 / NDIS6 checksum offload for IPv4 / IPv6 TCP / UDP
- Supports Large Send Offload v1 and v2 (LSO v1 / v2)
- Supports Jumbo Frames up to 9 KB
- Microsoft AOAC support with 16 sets of 128-byte wake-up frame pattern matching
- Supports link-change wake-up
- Supports Microsoft WPD (Wake Packet Detection)
- Supports protocol offload for ARP (IPv4) and NS (IPv6)
- Intel CPPM: USB 2.0 L1 with 3 ms BESL
- USB 3.0 dynamic LTM messaging, U1 / U2 low-power states, and selective suspend
| Product Overview | |
| Main Controller: | Realtek RTL8153 |
| Bus Interface: | USB 3.0 (Type C) |
| Ports: | SFP × 1 |
| Speed: | SFP port supports 1000 Mb/s fiber |
| Supported Standards: | 802.3z / 802.3ab / 802.3x / 802.1Q |
| Supported Cable: | Multi-mode fiber (62.5/125µm, 50/125µm, 850nm) or single-mode fiber (9µm, 1310nm) |
| Bracket: | |
| PCB Size (mm): | |
| Weight (G.W): | |
| Power Consumption: | Approx. 500mW |
| Temperature: | Operating 0°C ~ 55°C ; Storage -40°C ~ 85°C |
| Key Features | |
| Packet Buffer and Queues: ? | On-chip SRAM Tx/Rx buffer; USB 3.0 bulk transfer and LPM link power management |
| Checksum Offload: ? | NDIS5/NDIS6 IPv4/IPv6/TCP/UDP checksum offload |
| Jumbo Frames: ? | Supports Jumbo Frames up to 9K bytes |
| Segmentation Offload (TSO/LSO): ? | Supports Large Send v1 / v2 (TSO/LSO) |
| VLAN and Flow Control: ? | VLAN tagging (802.1Q) + QoS (802.1P) + 802.3x flow control + HP Auto MDIX |
| Management Features: ? | VeriPHY cable diagnostics + hardware CRC + LAN disable GPIO |
| Wake on LAN and Boot: ? | Wake on LAN + RealWoW! + Legacy PXE / UEFI PXE + protocol offload (ARP & NS) |
| Realtek Management Software | |
| Realtek Management Software: | Realtek USB Ethernet Diagnostic Utility (diagnostics and configuration tool) |
| Operating Systems Support | |
| Operating system support | Windows family (Windows XP / Vista / 7 / 8 / 8.1 / 10 / 11, Server versions subject to driver support) macOS (Mac OS X 10.6 and later) Linux (including Android) Unix / FreeBSD |