主页 > Products > Network Adapter > RJ45
Winyao WY546T2 Dual-Port Network Atapter

      Winyao WY546T2 Adapters Is Based on Intel 82546 Ethernet Controller With That Is a PCI Dual-port Gigabit Network Interface Card, Integrating Two RJ45 (UTP) Interfaces.

Downloads 

overview standards download

Performance Features:

  • TSO interleaving for reduced latency
  • Minimized device I/O interrupts using MSI and MSI-X
  • UDP, TCP and IP checksum offload
  • UDP and TCP transmit segmentation offload (TSO). machine
  • SCTP receive and transmit checksum offload
  • Packet interrupt coalescing timers (packet timers) and absolute-delay interrupt timers for both transmit and receive operation
  • EEE ( IEEE 802.3az) for reduced power consumption during low link utilization periods

Copper Gigabit Ethernet 1000Base-T :

  • Independently copper Gigabit Ethernet channels support four Gigabit Ethernet (1000Base-T), Fast Ethernet (100Base-Tx) and Ethernet (10Base-T)
  • Triple speed 1000Mbps (1000Base-T), 100 Mbps (100Base-Tx) and 10 Mbps (100Base-T) operation
  • Nway auto negotiation automatic sensing and switching between 1Gbps full duplex and 100 / 10 Mbps operations Simplex or Full Duplex.
  • 2 X RJ-45 female connectors

Common Key features:

  • Support PCI 2.0
  • High performance, reliability, and low power use in Intel 82546 Dual integrated MAC + PHY and SERDES chip Controllers
  • Ultra deep, packet buffer per channel lowers CPU utilization
  • Hardware acceleration that can offload tasks from the host processor. The Controllers can offload TCP/UDP/IP checksum calculations and TCP segmentation
  • Server class reliability, availability and performance features:
    • Link Aggregation and Load Balancing
  • Priority queuing – 802.1p layer 2 priority encoding
  • Virtual LANs –802.1q VLAN tagging
  • Jumbo Frame (9KB)
  • 802.x flow control
  • Multicast/ broadcast Packet replication
  • Supports Vital Product Data (VPD)
  • LEDs indicators for link/Activity/Speed status
Standards
  • IEEE 802.3ad
  • IEEE 802.3X
  • IEEE 802.1Q
Hardware Interface
  • PCI 2.0
  • 2 x 1G RJ45
  • LED indicator
  • Standard and low profile brackets
Compatibility
  • Windows® 10, 8.1, 8, 7
  • Windows® Server 2012, 2012 R2, 2008, 2008 R2
  • Linux® 2.6.x, 3.x.x, 4.6.x or later
  • VMware® ESXi™ 5.x/6.x & Hyper-V®
Jumbo Frames
  • Up to 9 KB
Special Features
  • 1G RJ45  for high speed network connectivity
  • Compatible with standard Cat5,5e,6,6e,7 class RJ45  Copper cables
  • Windows Server support
  • VMware® ESXi™ 4.x/5.x & Hyper-V® hypervisor support for virtualization
Additional Support
  • 802.3ad LACP NIC teaming
  • 802.1Q VLAN Tagging
  • Microsoft Scalable Networking
  • Receive-side scaling (RSS)
  • Message Signaled Interrupts (MSI)
  • IP, TCP, and UDP checksum offloading
  • Minimize overhead with reduced host bus traffic and CPU utilization
Power
  • Consumption: 4.12 W max.
Operating Temperature
  • 0 - 50 °C (32 – 122 °F)
Operating Humidity
  • Max. 90% non-condensing
Certifications
  • CE
  • FCC
PCB Size
  • 129 x 64 mm
Packing Size
  • 190 x 150 x 29 mm
Weight
  • 182 g 
Warranty
  • 3 year

Drivers  Adapter Complete Driver Pack
  •  
  • Operating systems:
  • Windows®  All
  • Linux®
  • FreeBSD®
  • VMware®
  •  Download drivers

 

Firmware tools  
Network cards update PXE,ISCSI and FCOE
  •  BootUtil:  
Installation Notes  
 
  • Hardware install:
  • Software installation: